D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 400

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:admin# create pim register_checksum_include_data rp_
address 11.1.1.1
Command: create pim register_checksum_include_data rp_ address
11.1.1.1
Success.
DES-3800:admin#
delete pim register_checksum_include_data
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To delete RPs that the Switch will send Register packets to and create checksums to be included with the data in Registered
packets:
DES-3800:admin#delete pim register_checksum_include_data rp_
address 11.1.1.1
Command: delete pim register_checksum_include_data rp_ address
11.1.1.1
Success.
DES-3800:admin#
show pim register_checksum_include_data_rp_list
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To show the RPs that the Switch will send Register packets to and create checksums to be included with the data in
Registered packets:
Used to disable the RPs that the Switch will send Register packets to
and create checksums to be included with the data in Registered
packets.
delete pim register_checksum_include_data rp_ address <ipaddr>
This command will disable the RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations only.
rp_address <ipaddr> - Enter the IP address of the RP that will
discontinue sending Register packets to and create checksums to be
included with the data in Registered packets.
Only Administrator or Operator-level users can issue this command.
Used to display RPs that the Switch will send Register packets to and
create checksums to be included with the data in Registered packets.
show pim register_checksum_include_data_rp_list
This command will display RPs that the Switch will send Register
packets to and create checksums to be included with the data in
Registered packets. This command is for PIM-SM configurations only.
None.
None.
396