D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 27

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
show config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show all system configurations from DRAM database:
Used to collect and show all system configurations in a single CLI
command..
show config
This command displays all system configurations. The continuous
displaying configuration can be aborted via by interrupt key, which
may be a sequence of keying processes or a single key. The display
format should be same as CLI configuration command.
current_config
config_in_nvram <config_id 1-2>
information
None.
DES-3800:admin#show config config_in_nvram
Command: show config config_in_nvram
# BASIC
config serial_port baud_rate 9600 auto_logout never
enable telnet 23
enable web 80
disable jumbo_frame
# STP
config stp maxage 20 hellotime 2 forwarddelay 15
priority 32768 version
enabled
disable stp
config stp ports 1-24 cost auto priority 128 edge
false p2p auto state enabled
# LACP
config link_aggregation algorithm mac_source
config lac
rstp txholdcount
23
3 fbpdu