D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 396

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
To configure the bootstrap period for the CBSR:
DES-3800:admin#config pim cbsr bootstrap_period 60
Command: config pim cbsr bootstrap_period 60
Success.
DES-3800:admin#
show pim cbsr
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To view the CBSR settings:
DES-3800:admin# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len
C-BSR Bootstrap Period
Interface
------------------
Trinity
System
DES-3800:admin#
Used to display the Candidate BSR settings of the switch, along with
CBSR parameters configured for the Switch.
show pim cbsr {ipif <ipif_name12>}
This command will display the settings for Candidate BSRs that are
accessible to the switch. This command is for PIM-SM configurations
only.
<ipif_name 12> - Enter the name of the IP interface for which to
display settings. Entering no name will display all CBSRs.
None.
: 30
: 2
IP Address
-----------
11.1.1.1/8
10.53.13.30/8
392
Priority
--------
4
-1 (disabled)