D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 392

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Usage example:
To create the settings to determine a static RP:
DES-3800:admin#create pim static_rp group 231.0.0.1/32 rp
11.1.1.1
Command: create pim static_rp group 231.0.0.1/32 rp
11.1.1.1
Success.
DES-3800:admin#
delete pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To remove the multicast group IP address used in identifying the Rendezvous Point (RP).:
DES-3800:admin#delete pim static_rp group 231.0.0.1/32
Command: delete pim static_rp group 231.0.0.1/32
Success.
DES-3800:admin#
show pim static_rp
Purpose
Syntax
Description
Parameters
Restrictions
Usage example:
To display the static RP settings as configured for the multiple access network:
DES-3800:admin#show pim static_rp
Command: show pim static_rp
PIM Static RP Table
Group
-------------
To remove the multicast group IP address used in identifying the
Rendezvous Point (RP).
delete pim static_rp group <ip_addr/netmask>
This command will remove the multicast group IP address used in
identifying the Rendezvous Point (RP). This command is for PIM-SM
configurations only.
group <ip_addr/netmask> - Enter the multicast group IP address used
in identifying the Rendezvous Point (RP). This address must be a class
D address.
Only Administrator or Operator-level users can issue this command.
To show the Static Rendezvous Point (RP) settings.
show pim static_rp
This command will display the Static Rendezvous Point (RP) settings.
This command is for PIM-SM configurations only.
None.
None.
RP Address
-----------
388