D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 337

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
clear address_binding dhcp_snoop binding_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear address_binding dhcp_snoop binding_entry:
config address_binding dhcp_snoop max_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of entries that ports can learn:
To clear the address binding entries learned for the specified ports.
clear address_binding dhcp_snoop binding_entry ports [<portlist> |
all]
To clear the address binding entries learned for the specified ports.
ports - Specifies the list of ports that you would like to clear the dhcp-
snoop learned entry.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#clear address_binding dhcp_snoop
binding_entry ports 1-3
Command: clear address_binding dhcp_snoop
binding_entry ports 1-3
Success.
DES-3800:admin#
Specifies the max number of entries which can be learned by the
specified ports.
config address_binding dhcp_snoop max_entry ports [<portlist> |
all] limit [<value 1-10> | no_limit]
By default, the per port max entry is 5.
This command specifies the maximum number of entries which can be
learned by the specified ports.
ports - Specifies the list of ports that you would like to set the maximum
dhcp-snoop learned entry.
limit - Specifies the maximum number.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#config address_binding dhcp_snoop
max_entry ports 1-3 limit 10
Command: config address_binding dhcp_snoop max_entry
ports 1-3 limit 10
Success.
DES-3800:admin#
333