xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
DES-3800:admin#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN "v1":
create vlan vlanid
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a VLAN with VLAN ID 2 and VLAN ID 3:
DES-3800:admin#create vlan vlanid 2-3
Command: create vlan vlanid 2-3
Success.
DES-3800:admin#
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the
Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#delete vlan v1
Command: delete vlan v1
Success.
DES-3800:admin#
Used to create VLANs by VLAN ID list on the switch.
create vlan vlanid <vidlist> {advertisement}
The create VLAN by vlanid command allows the creation of multiple
VLANs on the switch.
<vidlist> - Specifies a range of VLAN IDs to be created.
advertisement – Specifies to join GVRP or not. If not, the VLAN
can't join dynamically.
Only Administrator or Operator-level users can issue this command.
108