D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 325

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
Command
create address_binding ip_mac ipaddress
config address_binding ip_mac ipaddress
config address_binding ip_mac ports
show address_binding
delete address_binding
enable address_binding acl_mode
disable address_binding acl_mode
enable address_binding trap_log
disable address_binding trap_log
show address_binding dhcp_snoop
enable address_binding dhcp_snoop
disable address_binding dhcp_snoop
clear address_binding dhcp_snoop
binding_entry ports
config address_binding dhcp_snoop
max_entry ports
Each command is listed, in detail, in the following sections.
Parameters
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] |
mode {arp | acl]}
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] |
mode {arp | acl]}
[<portlist> | all ] { state [enable {[strict | loose]} | disable] |
allow_zeroip [enable | disable] | forward_dhcppkt [enable |
disable] }
[ip_mac {[all | ipaddress <ipaddr> mac_address <macaddr>]}
| blocked {[all | vlan_name <vlan_name> mac_address
<macaddr>]} | ports]
[ip-mac [ipaddress <ipaddr> mac_address <macaddr> |all] |
blocked [all | vlan_name <vlan_name> mac_address
<macaddr>]]
{[max_entry {ports <portlist> | binding_entry {port <port>}]}
[<portlist> | all]
[<portlist> | all] limit [<value 1-10> | no_limit]
321