D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 57

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
enable snmp authenticate traps
Parameters
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DES-3800:admin#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DES-3800:admin#
show snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
DES-3800:admin#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Traps
DES-3800:admin#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To prevent SNMP traps from being sent from the Switch:
None.
Only Administrator or Operator-level users can issue this command.
Used to show SNMP trap support on the Switch .
show snmp traps
This command is used to view the SNMP trap support status
currently configured on the Switch.
None.
None.
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the Switch.
None.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin#disable snmp traps
Command: disable snmp traps
Success.
DES-3800:admin#
: Enabled
: Enabled
53