D-Link DES-3852 - xStack Switch - Stackable Cli Manual page 369

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
config mcast_filter_profile
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To configure a multicast filter profile:
delete mcast_filter_profile
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To delete a multicast filter profile:
This command adds or deletes a range of multicast addresses to the
profile.
config mcast_filter_profile profile_id < value 1-24> { profile_name
<name> | [add | delete ] <mcast_address_list>}
This command adds or deletes a range of multicast IP addresses
previously defined.
profile_id - ID of the profile.
mcast_address_list - List of the multicast addresses to be put in the
profile. You can either specify a single multicast IP address or a range
of multicast addresses using the profile.
Only Administrator or Operator-level users can issue this command.
DES-3800:admin# config mcast_filter_profile profile_id
2 add 225.1.1.1 - 225.1.1.1
Command: config mcast_filter_profile profile_id 2 add
225.1.1.1 - 225.1.1.1
Success.
DES-3800:admin#
This command deletes a multicast address profile.
delete mcast_filter_profile profile_id <value 1-24>
This command deletes a multicast address profile
profile_id - ID of the profile
Only Administrator or Operator-level users can issue this command.
DES-3800:admin# delete mcast_filter_profile profile_id
3
Command: delete mcast_filter_profile profile_id 3
Success.
DES-3800:admin#
365