Clear Sntp Client - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.6.3

clear sntp client

Use this command to clear the SNTP client's operational mode.
clear sntp client
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the SNTP client's operational mode:
Matrix(rw)->clear sntp client
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-125