11.2.8.6
set netflow export-interval
Use this command to configure the NetFlow export interval.
set netflow export-interval interval
Syntax Description
interval
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Usage
Each DFE blade in the Matrix system will transmit a NetFlow packet when:
•
•
•
Example
This example shows how to set the NetFlow export interval to 10 minutes
Matrix(rw)->set netflow export-interval 10
Set the active flow timer value, between 1 to 60 minutes.
The default value is 30 minutes.
It has accumulated the maximum number of NetFlow records per packet,
which is 30, or
It has accumulated fewer than 30 NetFlow records and the active flow timer
has expired, or
The flow expires (ages out or is invalidated).
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring NetFlow
:
11-161