Show Ip Pim Rp - Enterasys Matrix 2G4072-52 Configuration Manual

IP Configuration Command Set
Configuring PIM
12.2.7.9

show ip pim rp

Use this command to display the active rendezvous points (RPs) that are cached with associated
multicast routing entries.
show ip pim rp [group | mapping | multicast group address]
Syntax Description
group
mapping
multicast group
address
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
If no optional parameters are specified, all active RPs will be displayed.
Examples
This example shows how to display information about active RPs:
Matrix>Router1#show ip pim rp
Group: 225.1.2.3, RP: 192.168.41.1, uptime 07:49:53, expires 00:02:09
This example shows how to display RP mapping information:
Matrix>Router1#show ip pim rp mapping
PIM Group to RP Mapping:
Group(s): 228.3.3.3/32
RP: 41.41.1.1, via Static Configuration
Group(s): 224.0.0.0/4
RP: 192.168.41.1, Priority:
RP: 192.168.91.1, Priority:
12-62 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays active RPs for any existing multicast
group(s).
(Optional) Displays all RP mappings.
(Optional) Displays RP information for a specific multicast
group IP address.
2, Expiry: 00:01:30, Uptime: 07:49:31
5, Expiry: 00:01:30, Uptime: 07:49:31