Show Spantree Mstmap - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.14

show spantree mstmap

Use this command to display the mapping of a filtering database ID (FID) to a Spanning Trees.
Since VLANs are mapped to FIDs, this shows to which SID a VLAN is mapped.
show spantree mstmap [fid fid]
Syntax Description
fid fid
Command Defaults
If fid is not specified, information for all assigned FIDs will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SID to FID mapping information for FID 1. In this case, no new
mappings have been configured:
Matrix(rw)->
FID:
1
6-26 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays information for specific
show spantree mstmap fid 1
SID:
0
FIDs.