Enterasys Matrix 2G4072-52 Configuration Manual page 1121

13.2.2.13 send-lifetime
Use this command to specify the time period during which an authentication key on a key chain is
valid to be sent.
send-lifetime start-time month date year {duration seconds | end-time | infinite}
Syntax Description
start-time
month
date
year
duration seconds
end-time
infinite
Command Syntax of the "no" Form
The "no" form of this command removes the send-lifetime configuration for an
authentication key. Start time can be specified, but is not mandatory:
no send-lifetime [start-time month date year]
Command Type
Router command.
Command Mode
Key chain key configuration: Matrix>Router1(config-keychain-key)#
Specifies the time of day the authentication key will begin to
be valid to be sent. Valid input is hours:minutes:seconds
(hh:mm:ss).
Specifies the month the authentication key will begin to be
valid to be sent. Valid input is the first three letters of the
month.
Specifies the day of the month the authentication key will
begin to be valid to be sent. Valid values, depending on the
length of the month, are 1 - 31.
Specifies the year the authentication key will begin to be
valid to be sent. Valid input is four digits up to 2035.
Length of time (in seconds) the key is valid to be sent. Valid
values are 1 - 4294967295.
Specifies the hours, minutes and seconds (hh:mm:ss) and
the month, date and year from the start-time the key is valid
to be sent.
Specifies that the key is valid to be sent from the start-time
on.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Routing Protocol Configuration Command Set
Configuring RIP
13-19