14.3.4.6
show tacacs session
Use this command to display the current TACACS+ client session settings.
show tacacs session {authorization | accounting [state]}
Syntax Description
authorization
accounting
state
Command Defaults
If state is not specified, all session accounting configuration parameters are
displayed (which at this time includes only the enabled/disabled status).
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display client session authorization information:
Matrix(ro)->show tacacs session authorization
TACACS+ service:
TACACS+ session authorization A-V pairs:
access level attribute
read-only
read-write
super-user
This example shows how to display client session accounting state.
Matrix(ro)->show tacacs session accounting state
TACACS+ session accounting state:
Display client session authorization settings.
Display client session accounting settings.
(Optional) Display the client session accounting state.
'priv-lvl'
'priv-lvl'
'priv-lvl'
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
exec
enabled
Configuring TACACS+
value
'0'
'1'
'15'
14-31