6.2.2.19
show spantree adminedge
Use this command to display the edge port administrative status for a port.
show spantree adminedge [port port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified edge port administrative status will be displayed for
all Spanning Tree ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the edge port status for fe.3.2:
Matrix(rw)->show spantree adminedge port fe.3.2
Port fe.3.2 has a Port Admin Edge of Edge-Port
(Optional) Displays edge port administrative
status for specific port(s). For a detailed
description of possible port-string values, refer to
Section 4.1.1
Matrix DFE-Platinum and Diamond Series Configuration Guide
Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
.
6-111