Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14.3.6.19 set pwa maxrequests
Use this command to set the maximum number of log on attempts allowed before transitioning the
PWA port to a held state.
set pwa maxrequests requests [port-string]
Syntax Description
maxrequests
port-string
Command Type
Switch command.
Command Defaults
If port-string is not specified, maximum requests will be set for all ports.
Command Mode
Read-Write.
Example
This example shows how to set the PWA maximum requests to 3 for all ports:
Matrix(rw)->set pwa maxrequests 3
14-74 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the maximum number of log on attempts.
(Optional) Sets the maximum requests for specific
port(s). For a detailed description of possible port-string
values, refer to
Section
4.1.1.