Table of Contents
Advertisement
Quick Links
FLASH DOWNLOAD CONFIGURATION SCREEN
Firmware revision 4.10 changed the FLASH Download Configuration
screen to allow configuring the SmartSwitch device to upload or
download a configuration file to or from a TFTP server.
This appendix applies to the SmartSwitch devices (standalone and
modules) that have firmware revision 4.10 and above, and supersedes the
FLASH Download Configuration screen description contained in the
following documents:
•
SmartSwitch Series 2E42, 2E43, 2E48, 2E49, 2H22, 2H23, 2H28,
2H33 and 2M46 Local Management Supplement (9032971-01)
•
SmartSwitch Series 6E122, 6E123, 6E128, 6E129, 6E132, 6E133,
6E138, 6E139, 6H122, 6H123, 6H128, 6H129, 6H133, and 6M146
Local Management Supplement (9033026-01)
B.1
FLASH DOWNLOAD CONFIGURATION SCREEN
When to Use
To perform the following:
•
download a new firmware image file from a TFTP server to the
SmartSwitch device,
•
download a configuration file from a TFTP server to the SmartSwitch
device, or
•
upload the configuration file from the SmartSwitch device to a TFTP
server.
To force an image download by changing the position of Switch
NOTE
6 located inside the device, refer to your SmartSwitch device
user's guide for details.
PN 9033215
APPENDIX B
B-1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Enterasys 2E42-27
Summary of Contents for Enterasys 2E42-27
-
Page 1: Flash Download Configuration Screen
• upload the configuration file from the SmartSwitch device to a TFTP server. To force an image download by changing the position of Switch NOTE 6 located inside the device, refer to your SmartSwitch device user’s guide for details. - Page 2 Appendix B: LM Security Screens Before downloading an image to the device, copy the image to the network TFTP server. For information on how to set up a workstation as a TFTP NOTE server, refer to the specific workstation documentation. The download and upload configuration capability enables customer configurable settings to be copied from one SmartSwitch device to another via the TFTP server, according to the rules described in this...
-
Page 3: How To Access
How to Access Use the arrow keys to highlight the FLASH DOWNLOAD CONFIGURATION menu item in the Device Configuration Menu screen, and press ENTER. The Flash Download Configuration screen (Figure B-1) displays. Screen Example EXECUTE Figure B-1 Flash Download Configuration Screen PN 9033215 FLASH Download Configuration Screen [RUNTIME]... -
Page 4: Field Definitions
Appendix B: LM Security Screens Field Definitions Refer to Table B-1 for a functional description of each screen field. Table B-1 Screen Field Descriptions Use this field… To… Download Select a method (RUNTIME, DOWNLOAD Method CONFIG, or UPLOAD CONFIG) to download (Selectable) (receive) an image file from a TFTP server, or upload (transmit) or download a configuration file... - Page 5 Table B-1 Screen Field Descriptions (Cont’d) Use this field… Reboot After Download (Toggle) TFTP Gateway IP Addr (Modifiable) Download Server IP (Modifiable) Download File Name (Modifiable) Last Image Server IP (Read-Only) Last Image File Name (Read-Only) PN 9033215 FLASH Download Configuration Screen To…...
-
Page 6: Image File Download Using Runtime
Appendix B: LM Security Screens Table B-1 Screen Field Descriptions (Cont’d) Use this field… To… Transfer Status See the status of the current or most recent (Read-Only) download or upload. B.1.1 Image File Download Using Runtime To download a firmware image file to the SmartSwitch device using Runtime, proceed as follows: Use the arrow keys to highlight the Reboot After Download field. -
Page 7: Configuration File Download Using Tftp
B.1.2 Configuration File Download Using TFTP To download a configuration file from a TFTP server to the SmartSwitch device, proceed as follows: Use the arrow keys to highlight the Download Method field. Use the SPACE bar to select DOWNLOAD CONFIG. When DOWNLOAD CONFIG is selected, the Reboot After NOTE Download field is automatically set to YES (and cannot be... -
Page 8: Configuration File Upload Using Tftp
Appendix B: LM Security Screens B.1.3 Configuration File Upload Using TFTP To upload a configuration file to a TFTP server, proceed as follows: Use the arrow keys to highlight the Download Method field. Use the SPACE bar to select UPLOAD CONFIG. When Upload Config is selected, the Reboot After Download NOTE field is automatically set to NO (and cannot be changed).
Need help?
Do you have a question about the 2E42-27 and is the answer not in the manual?
Questions and answers