Policy Classification Configuration Command Set
Setting the Status of Dynamically Assigned Policy Profiles
8.3.4.1
show policy dynamic
Use this command to display the status of dynamically assigned policy profile options.
show policy dynamic {[syslog-default] [trap-default]}
Syntax Description
syslog-default
trap-default
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of Syslog message sending when a dynamic rule is
applied:
Matrix(rw)->show policy dynamic syslog-default
Syslog-default is ENABLED
8-94 Matrix DFE-Platinum and Diamond Series Configuration Guide
Shows the status of automatically sending Syslog messages
when a dynamic rule is applied.
Shows the status of automatically sending SNMP trap
messages when a dynamic rule is applied.