7.3.6.4
clear gvrp
Use this command to clear GVRP status or on one or more ports.
clear gvrp [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, GVRP status will be cleared for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to clear GVRP status globally on the device:
Matrix(rw)->clear gvrp
(Optional) Clears GVRP status on specific port(s). For a
detailed description of possible port-string values, refer to
Section
4.1.1.
Matrix DFE-Platinum and Diamond Series Configuration Guide
VLAN Configuration Command Set
Enabling/Disabling GVRP
7-45