Logging And Network Management Command Set
Configuring System Logging
11.2 LOGGING AND NETWORK MANAGEMENT COMMAND SET
11.2.1 Configuring System Logging
Purpose
To display and configure system logging, including Syslog server settings, logging severity levels
for various applications, Syslog default settings, and the logging buffer.
Commands
Commands to configure system logging are listed below and described in the associated section as
shown.
•
show logging all
•
show logging server
•
set logging server
•
clear logging server
•
show logging default
•
set logging default
•
clear logging default
•
show logging application
•
set logging application
•
clear logging application
•
show logging local
•
set logging local
•
clear logging local
•
set logging here
•
clear logging here
•
show logging buffer
11-2 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Section
11.2.1.1)
(Section
11.2.1.2)
(Section
11.2.1.3)
(Section
11.2.1.4)
(Section
11.2.1.5)
(Section
11.2.1.6)
(Section
11.2.1.7)
(Section
11.2.1.8)
(Section
11.2.1.9)
(Section
11.2.1.10)
(Section
11.2.1.11)
(Section
11.2.1.12)
(Section
11.2.1.13)
(Section
11.2.1.14)
(Section
11.2.1.15)
(Section
11.2.1.16)