Show Arp - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.5.1

show arp

Use this command to display the switch's ARP table.
show arp
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the ARP table:
Matrix(rw)->
LINK LEVEL ARP TABLE
IP Address
-----------------------------------------------------
10.20.1.1
134.142.21.194
134.142.191.192
134.142.192.18
134.142.192.119
-----------------------------------------------------
Table 11-11
Table 11-11 show arp Output Details
Output
IP Address
Phys Address
Flags
show arp
Phys Address
00-00-5e-00-01-1
00-00-5e-00-01-1
00-00-5e-00-01-1
00-00-5e-00-01-1
00-00-5e-00-01-1
provides an explanation of the command output.
What It Displays...
IP address mapped to MAC address.
MAC address mapped to IP address.
Route status. Possible values and their definitions include:
S - manually configured entry (static)
P - respond to ARP requests for this entry
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
Flags Interface
S host0
S host0
S host0
S host0
S host0
11-99