Show Policy Profile - Enterasys Matrix 2G4072-52 Configuration Manual

Policy Classification Configuration Command Set
Configuring Policy Profiles
8.3.1.1

show policy profile

Use this command to display policy profile information.
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Syntax Description
all | profile-index
consecutive-pids
-verbose
Command Defaults
If optional parameters are not specified, summary information will be displayed for
the specified index or all indexes.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display policy information for policy profile 11:
Matrix(rw)->show policy profile 11
Profile Index
Profile Name
Row Status
Port VID Status
Port VID Override
CoS Status
CoS
Tagged Egress VLAN List :11
Forbidden VLAN List
Untagged VLAN List
Replace TCI Status
Admin Profile Usage
Oper Profile Usage
Dynamic Profile Usage
8-4 Matrix DFE-Platinum and Diamond Series Configuration Guide
Displays policy information for all profile indexes or a
specific profile index.
(Optional) Displays information for specified consecutive
profile indexes.
(Optional) Displays detailed information.
:11
:MacAuth1
:active
:enabled
:11
:disabled
:0
:none
:none
:enabled
:none
:fe.2.1-2
:fe.2.1-2