Configuring Priority To Transmit Queue Mapping - Enterasys Matrix 2G4072-52 Configuration Manual

Port Priority and Rate Limiting Configuration Command Set

Configuring Priority to Transmit Queue Mapping

9.3.2 Configuring Priority to Transmit Queue Mapping
Purpose
To perform the following:
•
View the current priority to transmit queue mapping of each port, which includes both physical
and virtual ports.
•
Configure each port to either transmit frames according to the port priority transmit queues (set
using the set port priority command described back in
priority based on a percentage of port transmission capacity (set using the set priority queue
command described in
•
Clear current port priority queue settings for one or more ports.
Commands
The commands used in configuring transmit priority queues are listed below and described in the
associated section.
•
show port priority-queue
•
set port priority-queue
•
clear port priority-queue
9-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
Section 9.3.2.2).
(Section 9.3.2.1)
(Section 9.3.2.2)
(Section 9.3.2.3)
Section 9.3.1.2), or according to a