Show Tacacs Singleconnect - Enterasys Matrix 2G4072-52 Configuration Manual

14.3.4.11 show tacacs singleconnect

Use this command to display the current status of the TACACS+ client's ability to send multiple
requests over a single TCP connection.
show tacacs singleconnect [state]
Syntax Description
state
Command Defaults
If state is not specified, all single connection configuration parameters are
displayed (which at this time includes only the enabled/disabled state).
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to display the state of the TACACS+ client's ability to send multiple
requests over a single connection.
Matrix(rw)->show tacacs singleconnect
(Optional) Specifies that only the single connection state
should be displayed.
TACACS+ single-connect state:
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Configuring TACACS+
enabled
14-37