Set Multiauth Port - Enterasys Matrix 2G4072-52 Configuration Manual

Security Configuration Command Set
Configuring Multiple Authentication

14.3.10.6 set multiauth port

Use this command to set multiple authentication properties for one or more ports.
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
Syntax Description
mode auth-opt |
auth-reqd |
force-auth |
force-unauth
numusers
numusers
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to set the port multiple authentication mode to required on ge.3.14:
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14
14-140 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the port(s)' multiple authentication mode as:
•
auth-opt — Authentication optional
•
auth-reqd — Authentication required
•
force-auth — Authentication considered
•
force-unauth — Authentication disabled
Specifies the number of users allowed authentication on
port(s).
Specifies the port(s) on which to set multiple authentication
properties.