Clear Radius - Enterasys Matrix 2G4072-52 Configuration Manual

Security Configuration Command Set
Configuring RADIUS
14.3.2.3

clear radius

Use this command to clear RADIUS server settings.
clear radius [state] [retries] [timeout] [server [index | all] [realm {index | all}]
Syntax Description
state
retries
timeout
server
realm
index | all
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
•
•
Examples
This example shows how to clear all settings on all RADIUS servers
Matrix(rw)->clear radius server all
This example shows how to reset the RADIUS timeout to the default value of 20 seconds
Matrix(rw)->clear radius timeout
14-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Resets the RADIUS client state to the default
setting of disabled.
(Optional) Resets the maximum number of attempts a user
can contact the RADIUS server before timing out to 3.
(Optional) Resets the maximum amount of time to establish
contact with the RADIUS server before timing out to 20
seconds.
(Optional) Deletes server settings.
(Optional) Resets the realm setting to allowing any
authentication.
Resets settings for a specified server or all RADIUS
servers.
If index or all is not specified for clearing RADIUS server, all RADIUS server
settings will be deleted.
If no other optional parameters are specified, all RADIUS settings will be
cleared.
:
: