Enterasys Matrix 2G4072-52 Configuration Manual page 1257

14.3.5.4 set dot1x auth-config
Use this command to configure 802.1X authentication.
set dot1x auth-config {[authcontrolled-portcontrol {auto | forced-auth |
forced-unauth}] [keytxenabled{false | true}] [maxreq value] [quietperiod
value] [reauthenabled {false | true}] [reauthperiod value] [servertimeout
timeout] [supptimeout timeout] [txperiod value]} [port-string]
Syntax Description
authcontrolled-
portcontrol auto |
forced-auth |
forced-unauth
keytxenabled
false | true
maxreq value
quietperiod value
reauthenabled
false | true
reauthperiod
value
Specifies the EAPOL port control mode as:
•
auto - Auto authorization mode (default). The Matrix
system will only forward frames received on a port
which are considered authenticated according to the
state of the corresponding access entity.
•
forced-auth - Forced authorized mode, which
effectively disables 802.1X authentication on the port,
and allows all frames received on the port to be
forwarded.
•
forced-unauth - Forced unauthorized mode, which
effectively disables 802.1X authentication on the port.
When 802.1X is the only active authentication agent on
a given port, this setting means all frames received will
be dropped.
Enables (true) or disables (false) 802.1X key transmission
by the authenticator PAE state machine.
Specifies the maximum number of authentication requests
allowed by the backend authentication state machine. Valid
values are 1 - 10.
Specifies the time (in seconds) following a failed
authentication before another attempt can be made by the
authenticator PAE state machine. Valid values are 0 -
65535.
Enables (true) or disables (false) reauthentication control
of the reauthentication timer state machine.
Specifies the time lapse (in seconds) between attempts by
the reauthentication timer state machine to reauthenticate a
port. Valid values are 0 - 65535.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Configuring 802.1X Authentication
14-47