Enterasys Matrix 2G4072-52 Configuration Manual page 1254

Security Configuration Command Set
Configuring 802.1X Authentication
14.3.5.2 show dot1x auth-config
Use this command to display 802.1X authentication configuration settings for one or more ports.
show dot1x auth-config [authcontrolled-portcontrol] [keytxenabled]
[maxreq] [quietperiod] [reauthenabled] [reauthperiod] [servertimeout]
[supptimeout] [txperiod] [port-string]
Syntax Description
authcontrolled-
portcontrol
keytxenabled
maxreq
quietperiod
reauthenabled
reauthperiod
servertimeout
supptimeout
txperiod
port-string
14-44 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays the current value of the controlled Port
control parameter for the Port.
(Optional) Displays the state of 802.1X key transmission
currently in use by the authenticator PAE state machine.
(Optional) Displays the value set for maximum requests
currently in use by the backend authentication state
machine.
(Optional) Displays the value set for quiet period currently
in use by the authenticator PAE state machine.
(Optional) Displays the state of reauthentication control
used by the Reauthentication Timer state machine.
(Optional) Displays the value, in seconds, set for the
reauthentication period used by the reauthentication timer
state machine.
(Optional) Displays the server timeout value, in seconds,
currently in use by the backend authentication state
machine.
(Optional) Displays the authentication supplicant timeout
value, in seconds, currently in use by the backend
authentication state machine.
(Optional) Displays the transmission period value, in
seconds, currently in use by the authenticator PAE state
machine.
(Optional) Limits the display of desired information
information to specific port(s). For a detailed description of
possible port-string values, refer to Section 4.1.1.