IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12.2.8.6
sticky
Use this command to configure sticky session persistence for this server farm. See
Persistence Configuration Considerations"
This command is used in conjunction with the persistence level sticky command described in
Section
12.2.8.18.
sticky
Syntax Description
None
Command Syntax of the "no" Form
The "no" form of this command removes this server farm using persistence sticky:
no sticky
Command Type
Router command.
Command Mode
SLB Server Farm Configuration mode: Matrix>Router1(config-slb-sfarm)#
Command Defaults
None
Example
This example shows how to set sticky persistence for the "lsnat" server farm:
Matrix>Router1(config)#ip slb serverfarm lsnat
Matrix>Router1(config-slb-sfarm)#sticky
12-80 Matrix DFE-Platinum and Diamond Series Configuration Guide
on page 12-71 for more information.
"Sticky