Enterasys Matrix 2G4072-52 Configuration Manual page 1061

12.2.8.20 ip slb allowaccess_all
Use this command to allow all clients to directly access all services provided by real servers
EXCEPT FOR those services configured for server load balancing. The real servers are still
protected from direct client access for configured services only.
See "Configuring Direct Access to Real Servers"
this command in conjunction with the virtual server configuration mode command allow
accessservers.
ip slb allowaccess_all
Syntax Description
None
Command Syntax of the "no" Form
The "no" form of this command removes direct access for all clients:
no ip slb allowaccess_all
Command Type
Router command.
Command Mode
Global configuration mode: Matrix>Router1(config)#
Command Defaults
None.
Examples
This example shows how to allow all clients to have direct access to real servers for all services
except those configured for server load balancing:
Matrix>Router1(config)#ip slb allowaccess_all
This example shows how to configure both methods of direct access to real servers. Note that the
clients identified with the allow accessservers command will have direct access to the real servers
for all services (including those configured for load-balancing) and be blocked from using the
virtual server. All other clients will have direct access to real servers for all services except those
configured for server load balancing.
Configuring Load Sharing Network Address Translation (LSNAT)
on page 12-71 for more information about using
Matrix DFE-Platinum and Diamond Series Configuration Guide
IP Configuration Command Set
12-101