Table 11-3 Sample Mnemonic Values for Logging Applications
Mnemonic
AAA
AddrNtfy
CLI
FlowLimit
LACP
OSPF
Router
RtrAcl
RtrFE
RtrArpProc
RtrLSNat
SNMP
System
Trace
UPN
VRRP
Webview
Command Defaults
•
•
Command Type
Switch command.
If level is not specified, none will be applied.
If server is not specified, messages will be sent to all Syslog servers.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Application
Authentication, Authorization, & Accounting
Address Add and Move Notification
Command Line Interface
Flow Limiting
Link Aggregation Control Protocol
Open Shortest Path First Routing Protocol
Router
Router Access Control List
Router Forwarding Engine
Router Arp Process
Router Load Sharing Network Address Translation
Simple Network Management Protocol
Non-Application items such as general
blade/chassis/configurations, etc.
Router Tracing
User Personalized Networking
Virtual Router Redundancy Protocol
Webview Device Management
Configuring System Logging
11-17