Show Igmp Counters - Enterasys Matrix 2G4072-52 Configuration Manual

IGMP Configuration Command Set
Configuring IGMP

10.4.2.19 show igmp counters

Use this command to display IGMP counter information.
show igmp counters
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the IGMP counters:
Matrix(rw)->show igmp counters
Igmp Counters:
Igmp Group Table is Full
Igmp Version 1 Queries transmitted
Igmp Version 2 Queries transmitted
Igmp Version 3 Queries transmitted
Igmp Group Specific Queries transmitted
Igmp Queries received
Igmp Version 1 Joins received
Igmp Version 2 Joins received
Igmp Version 3 Joins received
Igmp Leave Groups received
Igmp Dropped Frames
10-28 Matrix DFE-Platinum and Diamond Series Configuration Guide
: false
: 0
: 1016368
: 0
: 0
: 776482
: 0
: 1024
: 22
: 0
: 22