Clear Spantree Bridgehellomode - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.29

clear spantree bridgehellomode

Use this command to reset the Spanning Tree administrative hello mode to enabled.
clear spantree bridgehellomode
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Spanning Tree bridge hello mode to enabled:
Matrix(rw)->clear spantree bridgehellomode
6-42 Matrix DFE-Platinum and Diamond Series Configuration Guide