Enterasys Matrix 2G4072-52 Configuration Manual page 676

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
ipxsource
ipxdest
udpportsource
udpportdest
tcpportsource
tcpportdest
ipxsourcesocket
ipxdestsocket
macsource
macdest
ipfrag
icmptype
vlantag
tci
port
class-data-val
class-data-mask
Command Defaults
•
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to use
policy 2, classification 65, to drop packets from a source IP address of 172.16.1.2:
Matrix(rw)->set policy classify 2 65 vlan drop ipsource 172.16.1.2
8-32 Matrix DFE-Platinum and Diamond Series Configuration Guide
Classifies based on source IPX address.
Classifies based on destination IPX address.
UDP port source - (0 - 65535)
UDP port destination - (0 - 65535)
TCP port source - (0 - 65535)
TCP port destination - (0 - 65535)
Classifies based on source IPX socket.
Classifies based on destination IPX socket.
Classifies based on MAC source address.
Classifies based on MAC destination address.
Classifies based on IP fragmentation value.
Classifies based on ICMP type.
Classifies based on VLAN tag.
Classifies based on Tag Control Information.
Classifies based on port-string.
Data Value of meaning
Number of mask bits to apply to Data Value
If mask is not specified, all data bits will be considered relevant.
Table 8-3 to create (and enable) a VLAN classification rule to