Enterasys Matrix 2G4072-52 Configuration Manual page 1084

IP Configuration Command Set
Configuring Dynamic Host Configuration Protocol (DHCP)
12.2.9.9 netbios-name-server
Use this command to assign one or more NetBIOS WINS servers to DHCP clients.
netbios-name-server address [address2...address8]
Syntax Description
address
address2...
address8
Command Syntax of the "no" Form
The "no" form of this command deletes the NetBIOS WINS server list:
no netbios-name-server
Command Type
Router command.
Command Mode
Any DHCP configuration mode.
Command Defaults
If address2...address8 is not specified, no additional addresses will be configured.
Example
This example shows how to assign a NetBIOS WINS server at 13.12.1.90 to the "localpool" address
pool:
Matrix>Router1(config)#ip dhcp pool localpool
Matrix>Router1(config-dhcp-pool)#netbios-name-server 13.12.1.90
12-124 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the IP address of a NetBIOS WINS server.
(Optional) Specifies, in order of preference, up to 7
additional NetBIOS WINS server IP address(es).