Set Macauthentication Significant-Bits - Enterasys Matrix 2G4072-52 Configuration Manual

14.3.7.6

set macauthentication significant-bits

Use this command to set the number of significant bits of the MAC address to use for
authentication.
set macauthentication significant-bits number
Syntax Description
number
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to set the MAC authentication significant bits to 24:
Matrix(rw)->set macauthentication significant-bits 24
Specifies a number of significant bits.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Configuring MAC Authentication
14-87