Clear Spantree Lpthreshold - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Loop Protect Features
6.2.3.11

clear spantree lpthreshold

Use this command to return the Loop Protect event threshold to its default value of 3.
clear spantree lpthreshold
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the Loop Protect event threshold to the default of 3:
Matrix(rw)->clear spantree lpthreshold
6-132 Matrix DFE-Platinum and Diamond Series Configuration Guide