Security Configuration Command Set
Configuring 802.1X Authentication
•
Examples
This example shows how to display 802.1X status:
Matrix(rw)->show dot1x
DOT1X is disabled.
This example shows how to display authentication diagnostics information for fe.1.1:
Matrix(rw)->show dot1x auth-diag fe.1.1
Port: 1
Enter Connecting:
EAP Logoffs While Connecting:
Enter Authenticating:
Success While Authenticating:
Timeouts While Authenticating:
Fail While Authenticating:
ReAuths While Authenticating:
EAP Starts While Authenticating:
EAP Logoff While Authenticating:
ReAuths While Authenticated:
EAP Starts While Authenticated:
EAP Logoff While Authenticated:
Backend Responses:
Backend Access Challenges:
Backend Other Requests To Supp:
Backend NonNak Responses From Supp:
Backend Auth Successes:
Backend Auth Fails:
14-42 Matrix DFE-Platinum and Diamond Series Configuration Guide
If port-string is not specified, information for all ports will be displayed.
Auth-Diag:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0