Policy Classification Configuration; Policy Classification Configuration Summary - Enterasys Matrix 2G4072-52 Configuration Manual

Policy Classification Configuration

This chapter describes the Policy Classification set of commands and how to use them.
NOTE: It is recommended that you use Enterasys Networks NetSight Atlas Policy
Manager as an alternative to CLI for configuring policy classification on the Matrix
Series devices.
8.1

POLICY CLASSIFICATION CONFIGURATION SUMMARY

Matrix Series devices support policy profile-based provisioning of network resources by allowing
IT administrators to:
•
Create, change or remove user profiles based on business-specific use of network services.
•
Permit or deny access to specific services by creating and assigning classification rules which
map user profiles to protocol-based frame filtering policies configured for a particular VLAN or
Class of Service (CoS).
•
Assign or unassign ports to policy profiles so that only ports activated for a profile will be
allowed to transmit frames accordingly.
•
Configure CoS to automatically assign policy-based inbound rate limiters and transmit queues.
•
Set the status of dynamically assigned policy profiles.
NOTE: Matrix Series devices also support policy-based routing, which forwards or
drops packets at Layer 3 according to matching access lists (ACLs) in route maps
configured on routing interfaces. For details, refer to
Matrix DFE-Platinum and Diamond Series Configuration Guide
Section 14.3.13.
8
8-1