Enterasys Matrix 2G4072-52 Configuration Manual page 678

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
ipxdest
ipxsource
ipxdestsocket
ipxsourcesocket
ipxtype
llcDsapSsap
macdest
macsource
tci
port
tcpdestportip
tcpsourceportip
udpdestportip
udpsourceportip
vlantag
data
mask mask
8-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
Classifies based on destination IPX address.
Classifies based on source IPX address.
Classifies based on destination IPX socket.
Classifies based on source IPX socket.
Classifies based on IPX packet type.
Classifies based on DSAP/SSAP pair in 802.3 type
packet.
Classifies based on MAC destination address.
Classifies based on MAC source address.
Classifies based on Tag Control Information.
Classifies based on port-string.
Classifies based on TCP destination port with optional
post-fix IP address.
Classifies based on TCP source port optional post-fix IP
address.
Classifies based on UDP destination port optional post-fix
IP address.
Classifies based on UDP source port optional post-fix IP
address.
Classifies based on VLAN tag.
(Not required for ipfrag classification.) Specifies the code
for a predefined classifier. This value is dependent on the
classification type entered. Refer to
values for each classification type.
(Optional) Specifies the number of significant bits to
match, dependent on the data value entered. Refer to
Table 8-3 for valid values for each classification type and
data value.
Table 8-3 for valid