Example
This example shows how to add fe.1.10 to the port VLAN list of VLAN 4 (PVID 4). Since VLAN
4 is a new VLAN, it is created. Then port fe.1.10 is added to VLAN 4's untagged egress list, and is
cleared from the egress list of VLAN 1 (the default VLAN):
Matrix(rw)->set port vlan fe.1.10 4
Matrix(rw)->set vlan 4 create
Matrix(rw)->set vlan egress 4 fe.1.10 untagged
Matrix(rw)->clear vlan egress 1 fe.1.10
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Matrix DFE-Platinum and Diamond Series Configuration Guide
VLAN Configuration Command Set
7-15