Set Policy Invalid Action - Enterasys Matrix 2G4072-52 Configuration Manual

Policy Classification Configuration Command Set
Configuring Policy Profiles
8.3.1.5

set policy invalid action

Use this command to assign the action the device will apply to an invalid or unknown policy.
set policy invalid action {default-policy | drop | forward}
Syntax Description
default-policy
drop
forward
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign a drop action to invalid policies:
Matrix(rw)->set policy invalid action drop
8-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
Instructs the device to ignore this result and search for the
next policy assignment rule.
Instructs the device to block traffic.
Instructs the device to forward traffic as if no policy has
been assigned.