Enterasys Matrix 2G4072-52 Configuration Manual page 707

Example
This example shows how to display all Class of Service port type information. In this case, no new
port groups have been configured, so information for the two device default groups of 0 and 1 are
shown:
Matrix(rw)->show cos port-type
Number of resources:
txq = transmit queue(s)
irl = inbound rate limiter(s)
orl = outbound rate limiter(s)
Port type
Index description
----- ------------
0 DFE-P 16Q
1 DFE-P 4Q
Port type
Index description
----- ------------
0 DFE-P 32 IRL
1 DFE-P 8 IRL
Supported rate types:
perc
pps
Kbps
Mbps
Gbps
Tbps
Number of
slices /
Number of Supported
queues rate type
--------- ---------
64/16 perc
Kbps
Mbps
Gbps
32/4 perc
Kbps
Mbps
Gbps
Number of Supported
limiters rate type
--------- ---------
32 irl perc
Kbps
Mbps
Gbps
8 irl perc
Kbps
Mbps
Gbps
Matrix DFE-Platinum and Diamond Series Configuration Guide
Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
= percentage
= packets per second
= kilobits per second
= megabits per second
= gigabits per second
= terabits per second
Eligible
ports
-----------------
ge.1.1-12
ge.2.1-30;
ge.3.1-30;
ge.4.1-30;
fe.6.1-48;
ge.6.1-6;
fe.7.1-72
Eligible
ports
-----------------
ge.1.1-12
ge.2.1-30;
ge.3.1-30;
ge.4.1-30;
fe.6.1-48;
ge.6.1-6;
fe.7.1-72
Unselected
ports
--------------
ge.1.1-12
ge.2.1-30;
ge.3.1-30;
ge.4.1-30;
fe.6.1-48;
ge.6.1-6;
fe.7.1-72
Unselected
ports
--------------
ge.1.1-12
ge.2.1-30;
ge.3.1-30;
ge.4.1-30;
fe.6.1-48;
ge.6.1-6;
fe.7.1-72
8-63