Set Policy Port - Enterasys Matrix 2G4072-52 Configuration Manual

8.3.2.7

set policy port

Use this command to assign an administrative rule to a port.
NOTE: The set policy rule command
parameter will associate a classification rule with a policy profile index number, thus
making an administrative rule.
set policy port port-name admin-id
Syntax Description
port-name
admin-id
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign an administrative rule with an index of 20 to port fe.1.3:
Matrix(rw)->set policy port fe.1.3 20
Policy Classification Configuration Command Set
(Section
Specifies the port(s) on which to set assign an
administrative rule. For a detailed description of possible
port-string values, refer to
Specify a policy profile index number with a valid range of
[1..1023].
Matrix DFE-Platinum and Diamond Series Configuration Guide
Assigning Classification Rules to Policy Profiles
8.3.2.4) used with the admin-profile
Section 4.1.1.
8-43