Show Netstat - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Monitoring Network Events and Status
11.2.2.4

show netstat

Use this command to display statistics for the switch's active network connections.
show netstat [icmp | ip | routes | stats | tcp | udp]
Syntax Description
icmp
ip
routes
stats
tcp
udp
Command Defaults
If no parameters are specified, show netstat will be executed as shown in the
example below.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display statistics for all the current active network connections:
Matrix(rw)->show netstat
Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q
-------- ----- ------ ------
1cc6314 TCP
1cc6104 TCP
1cc6290 UDP
1cc620c UDP
11-30 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Shows Internet Control Message Protocol
(ICMP) statistics.
(Optional) Shows Internet Protocol (IP) statistics.
(Optional) Shows the IP routing table.
(Optional) Shows all statistics for TCP, UDP, IP, and
ICMP.
(Optional) Shows Transmission Control Protocol (TCP)
statistics.
(Optional) Shows User Datagram Protocol (UDP)
statistics.
Local Address
------------------ ------------------ -------
0 0 0.0.0.0.80
0 0 0.0.0.0.23
0 0 0.0.0.0.162
0 0 0.0.0.0.161
Foreign Address
0.0.0.0.0
0.0.0.0.0
0.0.0.0.0
0.0.0.0.0
(state)
LISTEN
LISTEN