Enterasys Matrix 2G4072-52 Configuration Manual page 740

Policy Classification Configuration Command Set
Setting the Status of Dynamically Assigned Policy Profiles
8.3.4.3 clear policy dynamic
Use this command to reset the status of dynamically assigned policy profiles back to defaults.
clear policy dynamic {[override] [syslog-default] [trap-default]}
Syntax Description
override
syslog-default
trap-default
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the sending of Syslog messages when a dynamic rule is applied
to enabled:
Matrix(rw)->clear policy dynamic syslog-default
8-96 Matrix DFE-Platinum and Diamond Series Configuration Guide
Resets the status of the ability for administratively assigned
profile rules to override dynamically assigned rules to
enabled.
Resets the status of the sending of Syslog messages when a
dynamic rule is applied to enabled.
Resets the status of the sending of SNMP trap messages
when a dynamic rule is applied to enabled.