Enterasys Matrix 2G4072-52 Configuration Manual page 1033

Table 12-8 LSNAT Configuration Task List and Commands (Continued)
Task
•
(Optional) Specify a load balancing algorithm.
•
(Optional) Configure this server farm to use
sticky session persistence. (See
Persistence Configuration Considerations"
page 12-71 for more information.)
Configure a real server:
•
(Optional) Display the real server configuration.
•
Enable a real server for service.
•
(Optional) Configure real server error handling.
•
(Optional) Limit active connections to the real
server.
•
(Optional) Specify a weight load number for the
real server.
Configure a virtual server:
•
(Optional) Display the virtual server
configuration.
•
Specify a virtual server name.
•
Associate a virtual server with a server farm.
•
Configure a virtual server IP address (VIP).
•
Enable a virtual server for service.
•
(Optional) Restrict access to specific virtual
server clients.
•
(Optional) Specify the type of session
persistence and timeout. Default is TCP. (See
"Session Persistence"
information.)
Configuring Load Sharing Network Address Translation (LSNAT)
"Sticky
on page 12-70 for more
Matrix DFE-Platinum and Diamond Series Configuration Guide
Use these commands...
predictor (Section
sticky (Section
on
show ip slb reals
inservice (Section
faildetect (Section
maxconns (Section
weight (Section
show ip slb vservers
ip slb vserver
serverfarm (Section
virtual (Section
inservice (Section
client (Section
persistence level
IP Configuration Command Set
12.2.8.5)
12.2.8.6)
(Section 12.2.8.7)
12.2.8.8)
12.2.8.9)
12.2.8.10)
12.2.8.11)
(Section 12.2.8.12)
(Section 12.2.8.13)
12.2.8.14)
12.2.8.15)
12.2.8.16)
12.2.8.17)
(Section 12.2.8.18)
12-73