Clear Multiauth Port - Enterasys Matrix 2G4072-52 Configuration Manual

14.3.10.7 clear multiauth port

Use this command to clear multiple authentication properties for one or more ports.
clear multiauth port {[mode] [numusers] port-string}
Syntax Description
mode
numusers
port-string
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to clear the port multiple authentication mode on all 1-Gigabit Ethernet
ports:
Matrix(rw)->clear multiauth port mode ge.*.*
Clears the port(s)' multiple authentication mode.
Clears the value set for the number of users allowed
authentication on port(s).
Specifies the port(s) on which to clear multiple
authentication properties.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Configuring Multiple Authentication
14-141