Set Igmp Add-Static - Enterasys Matrix 2G4072-52 Configuration Manual

IGMP Configuration Command Set
Configuring IGMP

10.4.2.11 set igmp add-static

Use this command to create a new static IGMP entry, or to add one or more new ports to an existing
entry.
set igmp add-static group vlan-list [modify] [include-ports] [exclude-ports]
Syntax Description
group
vlan-list
modify
include-ports
exclude-ports
Command Defaults
If not specified, the static entry will be created and not modified.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add port fe.1.3 to the IGMP group at 224.0.2 (VLAN 105):
Matrix(rw)->set igmp add-static 224.0.0.2 105 modify
include-ports fe.1.3
10-20 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies a group IP address for the entry.
Specifies the VLAN(s) on which to configure the entry.
Adds new ports to an existing entry.
Port or range of ports
Port or range of ports